Detail

HGM Powder Processing Plant

 
powder processing plant

Shanghai Clirik Machinery Co., Ltd. is specializing in processing plant for fine super fine powder of non-inflammable, non-explosive and brittle amterials with Moh's hardness under six, the moisture under 5% such as calcite. chalk, limestone, dolomite, kaolin, bentonite, talc, mica. magnesite, illite, pyrophyllite and vermiculite sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

HGM series processing plant maily consist of main unit, classifier, powder collector, dust cleaner, induced draft fan, muffler, sound-proof room, crushe, crucket elevator, storage hopper, and vibrating feeder.

Working Principle of HGM series powder processing plant:
1) After crushed by hammer crusher, the large materials become smaller pieces and are sent to the micro powder grinding mill.
2) When the micro powder grinding mill is at work, the granulated materials are crushed and grinded by the rollers into particles below 47micron.
3) The high-pressure air blower constantly inhales air within the micro powder grinding mill.
4) Along with the high speed airflow, micronized materials are brought to the classifier.
5) The qualified particles are screened and driven into the cyclone powder collector, finally exit from the discharging valve at the bottom;
6) A small proportion of the fine powders, with airflow, moving to the dust cleaner. Filtered clean air will be emitted from the air outlet of muffler in the end.

Technical data of HGM series powder processing plant:

Model HGM80 HGM90 HGM100 HGM100A HGM125
Ring Diameter(mm) 800 930 1035 1035 1300
Ring Number (PCS) 3 3-4 3 4 4
Roller Number(PCS) 21 24-32 27 34-36 40-44
Main Shaft Speed (r. p. min) 230-240 200-220 180-200 180-200 135-155
Input Size (mm) ≤20
Finished Size (um) 5-47(325-2500)
Capacity (t/h) 0.5-4.5 0.6-6.5 0.7-7 1-8.5 1.5-12
Outlet Size L*W*H (m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 18*4.6*8.6 14*9*10.25
Motor powder (KW) 145-165 185-204 263 263-290 380-430

Note: This specification is just referencing, any changes are subject to the products.

Email: info@clirik.com
Tel: 86-021-20236178
上一篇:没有了 下一篇:Stone Grinding Plant

Contact us

  • Tel: 0086-21-58974855
  • Fax: 0086-21-58975587
  • Add: No.19Fuqing Rd,Shanghai 201201,China
  • Fax: 0086-21-58975587

Tel: 0086-21-58974855 Fax: 0086-21-58975587 Add: No.19Fuqing Rd,Shanghai 201201,China Postcode: 201201 E-mail: info@clirik.com